![]() ![]() The following output shows that the network voice path cuts through: Vcsm_process_event: act_dcollect_procĭsp_digit_collect_off: packet_len=10 channel_id=129 packet_id=36ĭsp_idle_mode: packet_len=10 channel_id=1 packet_id=68 Vcsm_process_event: act_dcollect_digitĭsp_CP_tone_off: packet_len=10 channel_id=1 packet_id=71 The input timer is restarted with each digit and the device waits in idle mode for connection to proceed. The following output shows the collection of digits one by one until the higher level code indicates it has enough. Vcsm_process_event: act_setup_ind_ackĭsp_voice_mode: packet_len=22 channel_id=1 packet_id=73 coding_type=1 voice_field_size=160 VAD_flag=0 echo_length=128 comfort_noise=1 fax_detect=1ĭsp_dtmf_mode: packet_len=12 channel_id=1 packet_id=65 dtmf_or_mf=0ĭsp_CP_tone_on: packet_len=32 channel_id=1 packet_id=72 tone_id=3 n_freq=2 freq_of_first=350 freq_of_second=440 amp_of_first=4000 amp_of_second=4000 direction=1 on_time_first=65535 off_time_first=0 on_time_second=65535 off_time_second=0ĭsp_digit_collect_on: packet_len=22 channel_id=129 packet_id=35 min_inter_delay=550 max_inter_delay=3200 mim_make_time=18 max_make_time=75 min_brake_time=18 max_brake_time=75 It also shows that the digit timer is started. ![]() ![]() The following output shows that the higher layer code accepts the call, requests addressing information, and starts DTMF and dial-pulse collection. The following output shows that the call is accepted and presented to a higher layer code:ĭsp_set_sig_state: packet_len=14 channel_id=129 packet_id=39 state=0xC timestamp=0x0 This debug level shows the internal workings of the voice telephony call state machine. This debug command displays information about how each network indication and application request is handled. ![]() The debug vpm spi command traces how the voice port module SPI interfaces with the call control API. This command has no arguments or keywords. To disable debugging output, use the no form of this command. To trace how the voice port module security parameter index (SPI) interfaces with the call control application programming interface (API), use the debug vpm spicommand in privileged EXEC mode. set memory debug incremental starting-time.debug wlccp ap rm enhanced-neighbor-list. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |